Sensors, base units and DCIM for server rooms and remote sites
Showing 62 of 62 products
The AKCP sensorProbe1+ is a compact base unit for monitoring the environment, power and security of a single IT cabinet. It comes with a built-in temperature sensor on a 5ft cable, one RJ-45 port for AKCP Autosense sensors and one dry contact input/output, and an optional dual temperature and…
The AKCP sensorProbe2+ is a compact base unit that connects to all AKCP intelligent sensors from a single IP address. It offers 4 RJ-45 sensor ports and up to 20 dry contacts, suiting server rooms, small data centres, remote cabinets and wiring closets. Two ports are enabled by default and the Pro…
The AKCP sensorProbe2+ LCD is based on the sensorProbe2+ and adds a local display, which makes it a good fit for server rooms and individual racks. The screen shows up to 8 sensor values, critical status and the unit's IP address, while the unit also reports over the network. It has 4 RJ-45 sensor…
The AKCP sensorProbeX+ is a modular base unit that you configure to the site. It connects up to 16 AKCP intelligent sensors from one IP address, with up to 20 dry contact I/Os, 0–5 V DC or 4–20 mA analogue inputs, mini relay outputs and third-party device monitoring. Modules add sensor ports, dry…
The AKCP securityProbe 5E (SEC5E) is a Linux-based base unit that combines environmental, access control and security monitoring. It has 8 AutoSense RJ-45 sensor ports and, with E-Sensor8 and E-Opto16 expansion modules, supports up to 500 sensors. Four analogue BNC video inputs let it show pictures…
securityProbe 5E-X20 is an AKCP base unit that combines environmental monitoring with physical security. It has 8 auto-sensing RJ-45 sensor ports and 20 two-wire dry contact inputs for contact-closure devices, plus two expansion ports for E-Sensor8, E-Opto16 and cabinet control units, which takes a…
securityProbe 5E-X60 is the high-density member of AKCP's securityProbe 5E family, built for sites with many door, alarm and contact-closure points. It provides 60 two-wire dry contact inputs alongside 8 auto-sensing RJ-45 sensor ports, and two expansion ports for E-Sensor8, E-Opto16 and cabinet…
securityProbe 5ES is the standard, no-video version of AKCP's securityProbe 5E base unit, suited to server rooms and remote sites that need environmental and intrusion monitoring in a compact 1U chassis weighing 1 kg. It offers 8 auto-sensing RJ-45 sensor ports and two expansion ports, and with…
securityProbe 5ES-X20 takes everything in the standard securityProbe 5ES, the no-video version of AKCP's 5E base unit, and adds 20 two-wire dry contact inputs in a 1U rack-mount box. It suits server rooms and remote sites where door contacts, alarm outputs and similar volt-free devices must be…
securityProbe 5ES-X60 combines the standard, no-video securityProbe 5ES with 60 additional two-wire dry contact inputs in a 2U rack-mount box, making it AKCP's highest-capacity dry-contact option in this line. It fits server rooms, plant rooms and remote sites with many door, alarm and…
The securityProbe 5ESV is the video version of AKCP's securityProbe 5E base unit. It combines environmental monitoring, access control and security alerts in one Linux-based device with a built-in web interface, and adds four USB inputs for AKCP High Definition Digital cameras, with PTZ control over…
The securityProbe 5ESV-X20 is the securityProbe 5ESV with a built-in bank of 20 two-wire dry contact inputs, so door switches, alarm outputs and other volt-free signals can be wired straight to the unit. The inputs accept up to 5 V DC, or up to 40 V DC when an internal jumper selects opto-isolated…
The securityProbe 5ESV-X60 is the highest-capacity contact version of the securityProbe 5ESV, with 60 dry contact inputs on the unit itself. Where the 5ESV-X20 offers 20 inputs, the X60 suits larger cabinets, plant rooms and telecom sites with many door, alarm and status contacts; the inputs can be…
The powerProbeX+ is AKCP's branch-circuit power monitoring base unit, part of the sensorProbe+ family. One unit measures up to 48 individual circuits through eight banks of six CT inputs, with three voltage transformer inputs for single-phase or three-phase supplies from 100 V to 450 V AC. It…
The Wireless Tunnel Server (SP-WTS) is the LoRa gateway for AKCP's battery-powered Wireless Tunnel sensor nodes. It builds a private wireless network that needs no cloud service or third-party software, and collects, stores and graphs data from up to 30 wireless devices carrying 4 sensors each.…
The sensorProbe+ Wireless Tunnel (SP-WT) is a battery or USB-powered LoRa node that lets up to 4 wired AKCP intelligent sensors share a single radio, so monitoring can reach areas where running network cable is impractical. It communicates with AKCP's proprietary Wireless Tunnel protocol, with…
The E-Sensor8 is an expansion unit that adds eight RJ-45 intelligent sensor ports to AKCP securityProbe, sensorProbeX+ and sensorProbe2+E base units. It connects to a base unit's expansion port with standard CAT5 LAN cable, and further units can be daisy-chained through the E-In and E-Out ports,…
The AKCP E-Opto16 is an expansion module that adds 16 opto-isolated dry contact inputs to a sensorProbe+ or securityProbe 5E base unit. Each 2-wire input accepts equipment that outputs a signal or voltage, such as the outputs of an alarm panel, so those events can feed AKCP's built-in notification…
The AKCP Ultra Cold Temperature Sensor is a PT100 platinum RTD probe for monitoring very low temperatures, from -200 °C to +150 °C, in applications such as ultra-cold storage of vaccines and medical products. It reports in 0.1 °C increments with a typical accuracy of ±0.15 °C. The sensor plugs into…
The AKCP SNMP Temperature Sensor measures ambient room temperature from -55 °C to +75 °C and shares the readings over the network through a compatible sensorProbe+ or securityProbe base unit, which can pass data to third-party monitoring platforms via SNMP. It reads in 0.1 °C steps with ±0.2 °C…
The AKCP Thermocouple Sensor brings industrial temperature monitoring into AKCP's monitoring platform. It is available with a J or K type thermocouple, and plugs directly into the AKCP J or K type thermocouple adapter, which also lets existing third-party thermocouples be monitored. A K type probe…
The AKCP Spot Water Sensor detects water at a specific point and reports a wet or dry state to a compatible AKCP base unit. Its microprocessor-controlled capacitance technology lets it detect distilled water, which resistance-type sensors miss. The circuit is encased in epoxy so the sensor can stay…
The AKCP Rope Water Sensor monitors water leaks along a sensing cable, so one sensor can cover a large area such as a raised floor, a ceiling void, a basement or the perimeter of pumps, compressors and condensers. It reports wet or dry to a compatible base unit, and raises a critical state if the…
The AKCP Locate Rope Water Sensor detects water along a sensing rope and also reports where on the rope the first leak was detected, so staff can go straight to the problem under raised floors, in false ceilings or around pumps and condensers. The sensing rope is pre-ordered from 10 ft in multiples…
The AKCP Single Port Temperature and Humidity Sensor measures ambient temperature from -55 °C to +75 °C and relative humidity from 0 to 100% RH while using only one intelligent sensor port on the base unit, leaving an extra port free. It is powered by the base unit, detected automatically by…
The AKCP Cabinet Analysis Sensor combines front and rear cabinet temperature, humidity and differential pressure monitoring in one sensor. A string of six temperature sensors and two humidity sensors maps conditions at the front and rear, with the ∆T between them calculated, while the differential…
The AKCP Cabinet Thermal Map Sensor shows how well an IT rack is being cooled. Each string carries three temperature sensors and one humidity sensor, placed at the top, middle and bottom of the cabinet. The single-string THMS-V2 covers the front only, while the dual-string CTHMS-V2 combines front…
The AKCP Airflow Sensor (AFS00) tells you whether cooling air is moving. Placed in the air stream in front of intake or exhaust fans, air-conditioning vents or rack ventilation, it works as a simple on/off switch with a threshold that sets its sensitivity, giving an early warning of fan or cooling…
The AKCP Air Velocity Sensor (AVT00) measures how fast cooling air is moving, rather than just whether it is present. A thermal flow chip reads 0–10 m/s with ±3% FS accuracy, and the sensorProbe+ or securityProbe web interface shows the value as a percentage and a graph over time, so falling airflow…
The AKCP Air Quality Sensor brings particulate matter, gas indices, temperature and humidity into one compact sensor, so dust and chemical risks in IT spaces become visible. It reports PM1.0, PM2.5, PM4.0 and PM10 mass concentration over 0 to 1,000 µg/m³, carbon dioxide from 0 to 40,000 ppm,…
The AKCP Air Pollution & Pressure Sensor (AQX4) combines four measurements in one compact unit: air pollution level, temperature, humidity and static air pressure. A gas sensor tracks pollutants such as CO2, NOx and VOCs and turns them into a 0–100% air pollution level, so you can watch whether air…
The AKCP In-Line Power Meter sits between the electrical source and a basic power strip or individual appliance, turning an ordinary strip into an intelligent PDU. It measures voltage, current, active power, energy, power factor and leakage current with billing-grade accuracy on 1 phase, 100–250 V…
The AKCP Power Monitoring Sensor lets you track mains power remotely instead of running manual power audits, with immediate alerts when something goes wrong. This four-wire sensor mounts on a 35 mm DIN rail and comes as a single phase (230 V AC), a three-phase (230/400 V AC) and a three-phase…
The AKCP Mini Sensor Controlled Relay is a small adapter that switches its output according to the status of a sensor connected to an AKCP base unit. It is used to drive the larger relay of an existing appliance, such as cooling or power equipment, from a low-current signal. The output is selectable…
The AKCP AC Sensor Controlled Relay switches mains power to a connected device in response to sensor alerts, for example turning on a fan when room temperature passes its threshold or a light when a motion detector triggers. It sits between a mains inlet and outlet, takes its control signal from a…
The AKCP 8 Port Sensor Controlled Relay is a multi-port relay for process control that responds automatically to sensor status changes, without operator intervention during an alarm. Typical uses are on/off control of cooling equipment, power switching, activating alarms and energy management. Each…
The AKCP Isolated DC Voltage Sensor is a digital voltmeter that brings a custom DC signal into a sensorProbe+ or securityProbe base unit while keeping the normal alarm features: SNMP, e-mail and trap alerts on settable thresholds. The input is selectable between a 60 V range and a 5 V range, with…
The AKCP AC Voltage Sensor detects the presence or absence of AC line voltage in the 50–250 V AC range and reports a Normal or Alarm state in the base unit software and on an LED on the sensor. A typical use is to tell when a UPS has switched to battery power. It simply plugs into an AC power…
The AKCP IO-Digital8 Sensor adds 8 dry contacts to a securityProbe 5E or sensorProbe+ through a single RJ-45 sensor port, each reporting an Alarm or Normal status. Every contact can be set in software as an input or as an output of 0 V DC or 5 V DC, so one port can watch UPS status, security…
The AKCP Dry Contact Sensor connects burglar alarms, fire alarms and other third-party equipment to a sensorProbe+ base unit. Its pin works as an input that reads an open or closed switch, or as an output of 0 V (Low) or 5 V (High) chosen in software, so it can watch UPS status, security systems,…
AKCP Current Transformers are split-core clamps that fit around a cable or bus bar without opening the circuit, so power monitoring can be added without any supply interruption. The wide inner window takes large cables and bus bars, and the range covers many sizes for existing installations.…
The AKCP Contactless Current Meter (CCM) measures current in 2-core or 3-core power cables up to 32 A by sensing the magnetic field around the cable, so the cable never has to be split and no electrician or downtime is needed. It gives rack-level current readings for capacity planning, warns when a…
The AKCP Battery Health Sensor (BATTMON) tracks the condition of a single cell or a bank of batteries, and of DC power systems such as solar panel arrays. It combines a DC voltage meter with a battery terminal temperature probe and an external current transformer, so you can follow charge and…
The AKCP Battery Terminal Temperature Sensor (BTTS) connects directly to the negative battery terminal, the closest thermal connection to the battery's internal plates, to give readings that follow the real battery temperature. Its sensor chip is insulated against ambient temperature swings. It…
The AKCP 5 Dry Contact Inputs cable lets a sensorProbe2 or sensorProbe2+ read up to five open/closed contacts through one RJ-45 sensor port. Each input reports Alarm or Normal and can be defined by the user to watch things such as UPS status, security systems or air conditioning status. Alarms can…
The AKCP 4-20mA Converter lets a sensorProbe base unit read third-party transmitters that output a 4–20 mA current loop, a signal widely used in process control because it resists electrical noise over long distances. Typical sources include CO2 sensors, pH meters, air particle sensors and precision…
The AKCP Vibration Sensor is a normally closed contact switch that signals an alarm when vibration strikes the surface it protects, or when a window is broken. It guards walls, ceilings, windows, safes and cabinets against forced entry or tampering, and a built-in tamper switch on a separate circuit…
The AKCP Smoke Detector is a photoelectric detector that turns smoke detection into a network-monitored alarm. It reports Smoke or No Smoke to a sensorProbe+ or securityProbe base unit through an RJ-45 sensor port, and can also connect to a fire alarm panel at the same time. A disconnect alarm…
The AKCP Siren and Strobe Light adds a loud audible alarm and a bright flashing light to sensorProbe+ and securityProbe base units, using a single intelligent sensor port and no extra power supply. The siren reaches 100 dB at 100 cm and the strobe uses eight super bright LEDs flashing 400 times per…
The AKCP Sensor Status Light is a three-colour indicator that changes colour according to the status of a sensor on a sensorProbe+ base unit. Green, orange and red lights can each be solid, blinking at different speeds or off, and an internal buzzer can add an audible alert. Mounted on top of a…
The AKCP Security Sensor is a magnetic on/off switch that tells a sensorProbe or securityProbe base unit whether a door, cabinet or window is open or closed. When the two halves separate, the base unit raises an alert, which can include images from an attached camera. An unlimited number of sensors…
The AKCP PIR Hardware Motion Detector (MD00) is a passive infrared sensor that reports movement to an AKCP base unit as an alarm or normal state. It uses a dual-element infrared sensor with a 60° detection angle and a working distance of up to 3 m (9 ft), and can be mounted on a wall or ceiling. Up…
The AKCP Tank Depth Sensor (TDPS) measures the level of fuel and other liquids in storage tanks. It is suspended at the bottom of the tank and calculates depth from the pressure of the liquid column above it; programming the tank dimensions on the base unit shows volume as a percentage or in litres.…
The AKCP Rope Fuel Sensor (ropeFuel) is a rope-type leak detector that senses liquid hydrocarbon fuels at any point along its length and reports Wet or Dry to the base unit. It can pinpoint a leak to within 1 m (1 ft) and detects gasoline, diesel #1, Jet A/B/5/8, JP-4/5/7 and kerosene. Laid beneath…
The AKCP probeSwitch is a key-operated switch that lets a maintenance engineer turn off all notifications from an AKCP base unit with one turn of the key, then switch them back on when the work is done, so there is no need to log in to the web interface. It connects to a sensor port, is auto-sensed…
The AKCP Modbus to SNMP Adapter (MOD-A) makes it easier to wire Modbus appliances to the RS-485 Modbus and expansion port of a sensorProbeX+ or sensorProbe2+. It converts the RJ-45 MOD/EXP port into a 3-pin Phoenix terminal block (A+, B+, GND), so a 2-wire serial bus cable can be connected directly.…
The AKCP Programmable Sensor LCD Display plugs into a sensorProbe+ sensor port and shows the readings and Warning or Critical status of up to 8 AKCP intelligent or virtual sensors in a rotating list, configured through the web interface. It has a built-in temperature sensor measuring -40 °C to +75…
The AKCP Sensor Adapter (SEN-A) lets a base unit read third-party sensors that AKCP does not make. A selectable input, with autosense, accepts analogue sensors that output 0–10 V DC, or a dry contact input/output that keeps a 5 V DC supply on the connected device at all times. A 3-pin Phoenix…
The AKCP J & K Thermocouple Adapters let you connect an AKCP thermocouple, or an existing third-party thermocouple of industry-standard J or K type, to a sensorProbe+ or securityProbe base unit. The adapter turns the thermocouple into a network-enabled temperature sensor that can be monitored…
The AKCP Universal Mount Digital Camera (UMDC) is an infrared-enabled Sony 1/3″ CCD camera designed for the securityProbe series, so assets and rooms can be viewed from a browser anywhere. It delivers 640 × 480 pictures at 15 to 30 fps depending on the resolution chosen, with IR night vision up to…
The AKCP High-Resolution IR Digital Camera (HD-DC) lets operators visually inspect enterprise assets and resources from a web browser, from anywhere. It adds infrared night vision with a 20 m range and delivers 15–30 fps depending on the selected resolution (640 × 480 or 320 × 240), with JPG still…
AKCP Rack Containment Blanking Panels fill empty 1U and 2U gaps in server cabinets so cold air cannot slip through to the rear and hot air cannot flow back to the front. Keeping hot and cold air separate supports hot/cold aisle containment and helps protect PUE figures. Versions with cable brushes…
From Vodatel Jordan in Amman. We are an authorised AKCP partner and supply base units, sensors and monitoring software across Jordan, the Levant and the Gulf. Call +962 6 4626667 or email info@vodatel.com.jo for availability and a quotation.
Temperature, humidity, water and fuel leaks, airflow and air quality, smoke, motion and door contacts, AC and DC voltage, current and energy, battery health and tank levels, plus cameras and cabinet or door locks. Sensors plug into a sensorProbe+ or securityProbe base unit, which sends the alerts.
Not for a single room: each base unit has its own web interface and sends email and SNMP alerts. For several rooms or sites, Quicklime DCIM brings all units into one dashboard with maps, capacity planning and reports. We help you choose.
Yes. Our engineers in Amman survey the site, install the sensors and base units, set the thresholds and alerts, and maintain the system. Alongside Jordan, we supply Iraq, Palestine, Syria, Lebanon and the Gulf.
