Front and rear temperature, humidity and differential pressure in a single cabinet sensor
The AKCP Cabinet Analysis Sensor combines front and rear cabinet temperature, humidity and differential pressure monitoring in one sensor. A string of six temperature sensors and two humidity sensors maps conditions at the front and rear, with the ∆T between them calculated, while the differential pressure sensor checks airflow balance, which suits hot and cold aisle containment. It plugs into the RJ-45 sensor port of a sensorProbe+ base unit, which also powers it, and can be extended up to 18 m with standard CAT5/6 cable. Temperature is read from -40 °C to +75 °C, humidity from 0 to 100% RH and pressure up to ±125 Pa. Vodatel supplies, installs and supports it in Jordan as an authorised AKCP partner.
Authorised AKCP partner in Jordan · Local warranty and support
More AKCP products in JordanFactory-trained engineers in Amman handle installation, configuration and maintenance.
From single units to multi-site deployments, delivered and commissioned by our team.
Manufacturer warranty handled locally — no cross-border returns to manage.
| Measures | Front and rear temperature, humidity and differential pressure |
|---|---|
| Measurement range | Temperature: -40 °C to +75 °C (-40 °F to +167 °F) |
| Accuracy | Temperature: ±0.3 °C at -40 °C, +25 °C and +75 °C |
| Resolution | Temperature: 0.1 °C (0.2 °F) |
| Sensor count | 6 temperature values, 3 differential temperature (∆T) values |
| Compatible base units | sensorProbe+ series |
| Humidity measurement range | 0–100% RH |
| Differential pressure range | ±125 Pa (±0.5 inH2O / ±1.25 mbar) |
| Humidity accuracy | ±2% RH at 25 °C |
| Differential pressure accuracy | ±0.5% at 25 °C |
| Differential pressure resolution | 0.01 Pa |
| Connection | RJ-45 to the base unit, UTP CAT5e/6 cable |
|---|---|
| Maximum cable length | Up to 18 m (60 ft) with standard CAT5/6 LAN cable |
| Power supply | Powered by the sensorProbe+ base unit, no additional power needed |
|---|---|
| Power consumption | Typical 250 mW, 50 mA |
| Dimensions | 86 × 111 × 63 mm |
|---|---|
| Mounting | Wall mount |
| Status indicators | LEDs for connectivity and status |
| Operating temperature | -35 °C to +80 °C |
| Operating humidity | 20–80% RH, non-condensing |
| Brand | AKCP |
|---|---|
| Category | Data Centre & Environmental Monitoring |
| Product code | akcp-cabinet-analysis-sensor |
| Type | Sensor |
| Measures | Temperature, Humidity, Differential pressure |
| Connectivity | RJ-45 sensor port |
Full electrical, acoustic and interface specifications are published on the manufacturer's datasheet. Our team can confirm compatibility with your existing platform before you order.
The AKCP Cabinet Thermal Map Sensor shows how well an IT rack is being cooled. Each string carries three temperature sensors and one humidity sensor, placed at the top, middle and bottom of the cabinet. The single-string THMS-V2 covers the front only, while the dual-string CTHMS-V2 combines front…
The AKCP Airflow Sensor (AFS00) tells you whether cooling air is moving. Placed in the air stream in front of intake or exhaust fans, air-conditioning vents or rack ventilation, it works as a simple on/off switch with a threshold that sets its sensitivity, giving an early warning of fan or cooling…
The AKCP Air Velocity Sensor (AVT00) measures how fast cooling air is moving, rather than just whether it is present. A thermal flow chip reads 0–10 m/s with ±3% FS accuracy, and the sensorProbe+ or securityProbe web interface shows the value as a percentage and a graph over time, so falling airflow…
The AKCP Air Quality Sensor brings particulate matter, gas indices, temperature and humidity into one compact sensor, so dust and chemical risks in IT spaces become visible. It reports PM1.0, PM2.5, PM4.0 and PM10 mass concentration over 0 to 1,000 µg/m³, carbon dioxide from 0 to 40,000 ppm,…
Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.
