Particulate matter, CO2, VOC and NOx indices, temperature and humidity in one compact sensor
The AKCP Air Quality Sensor brings particulate matter, gas indices, temperature and humidity into one compact sensor, so dust and chemical risks in IT spaces become visible. It reports PM1.0, PM2.5, PM4.0 and PM10 mass concentration over 0 to 1,000 µg/m³, carbon dioxide from 0 to 40,000 ppm, relative VOC and NOx indices from 1 to 500, temperature from -10 °C to +50 °C and humidity from 0% to 90% RH, giving 9 sensor readings in total. Dust that coats heatsinks hinders cooling, and VOC or NOx combined with the wrong humidity can corrode metal parts, which is why it suits data centres, equipment rooms and offices. The cable can run up to 10 m. Vodatel supplies, installs and supports it in Jordan as an authorised AKCP partner.
Authorised AKCP partner in Jordan · Local warranty and support
More AKCP products in JordanFactory-trained engineers in Amman handle installation, configuration and maintenance.
From single units to multi-site deployments, delivered and commissioned by our team.
Manufacturer warranty handled locally — no cross-border returns to manage.
| Measures | Particulate matter, CO2, VOC and NOx indices, temperature and humidity |
|---|---|
| Measurement range | Carbon dioxide: 0–40,000 ppm |
| Accuracy | Carbon dioxide: ±(50 ppm + 2.5% of reading) |
| Resolution | Temperature: 0.1 °C (0.2 °F) |
| Sensor count | 9 |
| Particulate matter parameters | PM1.0, PM2.5, PM4.0, PM10 |
| Particulate mass concentration range | 0–1,000 µg/m³ |
| Particle size range | 0.3–10 µm |
| VOC index range | 1–500 index points (relative) |
| Temperature range | -10 °C to +50 °C (+14 °F to +122 °F) |
| Humidity range | 0–90% RH, non-condensing |
| Particulate mass concentration precision | ±10% or ±10 µg/m³ (whichever is larger) |
| Temperature accuracy | ±0.45 °C (typical) |
| Humidity accuracy | ±4.5% RH (typical) |
| Maximum cable length | 10 m (33 ft) |
|---|
| Part number | AQS |
|---|
| Lifetime | More than 10 years (dust resistant with Sheath Flow technology) |
|---|
| Brand | AKCP |
|---|---|
| Category | Data Centre & Environmental Monitoring |
| Product code | akcp-air-quality-sensor |
| Type | Sensor |
| Measures | Air quality, Temperature, Humidity |
| Connectivity | RJ-45 sensor port |
Full electrical, acoustic and interface specifications are published on the manufacturer's datasheet. Our team can confirm compatibility with your existing platform before you order.
The AKCP Air Pollution & Pressure Sensor (AQX4) combines four measurements in one compact unit: air pollution level, temperature, humidity and static air pressure. A gas sensor tracks pollutants such as CO2, NOx and VOCs and turns them into a 0–100% air pollution level, so you can watch whether air…
The AKCP In-Line Power Meter sits between the electrical source and a basic power strip or individual appliance, turning an ordinary strip into an intelligent PDU. It measures voltage, current, active power, energy, power factor and leakage current with billing-grade accuracy on 1 phase, 100–250 V…
The AKCP Power Monitoring Sensor lets you track mains power remotely instead of running manual power audits, with immediate alerts when something goes wrong. This four-wire sensor mounts on a 35 mm DIN rail and comes as a single phase (230 V AC), a three-phase (230/400 V AC) and a three-phase…
The AKCP Mini Sensor Controlled Relay is a small adapter that switches its output according to the status of a sensor connected to an AKCP base unit. It is used to drive the larger relay of an existing appliance, such as cooling or power equipment, from a low-current signal. The output is selectable…
Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.
