Low-current relay that switches on sensor status and drives larger relays from the base unit
The AKCP Mini Sensor Controlled Relay is a small adapter that switches its output according to the status of a sensor connected to an AKCP base unit. It is used to drive the larger relay of an existing appliance, such as cooling or power equipment, from a low-current signal. The output is selectable between a 5 V DC and GND pair rated 0.2 A and free contacts rated 1 A at 24 V DC or 120 V AC. It connects to the RJ-45 sensor ports of sensorProbe+ series base units, is powered by the base unit and mounts on a DIN rail or by screws. Vodatel supplies, installs and supports it in Jordan as an authorised AKCP partner.
Authorised AKCP partner in Jordan · Local warranty and support
More AKCP products in JordanFactory-trained engineers in Amman handle installation, configuration and maintenance.
From single units to multi-site deployments, delivered and commissioned by our team.
Manufacturer warranty handled locally — no cross-border returns to manage.
| Output | 3-pin terminal block with NO, NC, COM contacts |
|---|---|
| Sensor count | 1 |
| Compatible base units | sensorProbe+ series |
| Relay | Contact rated load 1 A at 24 V DC and 1 A at 120 V AC |
|---|---|
| Load rating | Up to 30 V DC / 120 V AC, 1 A; maximum switched power 24 W / 120 VA |
| Contact options | 5 V and GND contacts (0.2 A) or free contacts |
| Connection | RJ-45 jack to the base unit, UTP CAT5e/6 cable |
|---|---|
| Maximum cable length | Up to 30 m (100 ft) with standard CAT5/6 LAN cable |
| Power supply | Powered by the base unit; no additional power needed |
|---|---|
| Power consumption | Typical 150 mW, 30 mA |
| Dimensions | 56 × 55 × 33.3 mm |
|---|---|
| Mounting | DIN rail mounting, screw mounting |
| Status indicators | LED for relay active state |
| Operating temperature | -40 °C to +80 °C |
| Storage temperature | -40 °C to +80 °C |
| Electrical life | 100,000 operations at rated load |
| Mechanical life | 5 million operations (no load) |
| Brand | AKCP |
|---|---|
| Category | Data Centre & Environmental Monitoring |
| Product code | akcp-mini-sensor-controlled-relay |
| Type | Relay / controller |
| Connectivity | RJ-45 sensor port |
Full electrical, acoustic and interface specifications are published on the manufacturer's datasheet. Our team can confirm compatibility with your existing platform before you order.
The AKCP AC Sensor Controlled Relay switches mains power to a connected device in response to sensor alerts, for example turning on a fan when room temperature passes its threshold or a light when a motion detector triggers. It sits between a mains inlet and outlet, takes its control signal from a…
The AKCP 8 Port Sensor Controlled Relay is a multi-port relay for process control that responds automatically to sensor status changes, without operator intervention during an alarm. Typical uses are on/off control of cooling equipment, power switching, activating alarms and energy management. Each…
The AKCP Isolated DC Voltage Sensor is a digital voltmeter that brings a custom DC signal into a sensorProbe+ or securityProbe base unit while keeping the normal alarm features: SNMP, e-mail and trap alerts on settable thresholds. The input is selectable between a 60 V range and a 5 V range, with…
The AKCP AC Voltage Sensor detects the presence or absence of AC line voltage in the 50–250 V AC range and reports a Normal or Alarm state in the base unit software and on an LED on the sensor. A typical use is to tell when a UPS has switched to battery power. It simply plugs into an AC power…
Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.
