Switches mains power to a connected device automatically when a sensor alarms, with built-in fuse
The AKCP AC Sensor Controlled Relay switches mains power to a connected device in response to sensor alerts, for example turning on a fan when room temperature passes its threshold or a light when a motion detector triggers. It sits between a mains inlet and outlet, takes its control signal from a sensorProbe or securityProbe base unit over an RJ-45 sensor port, and can also be operated through the web interface or SNMP. A built-in 10 A fuse, varistors and a snubber circuit protect the contacts and the load, and four LEDs show relay, power and AC line status. Vodatel supplies, installs and supports it in Jordan as an authorised AKCP partner.
Authorised AKCP partner in Jordan · Local warranty and support
More AKCP products in JordanFactory-trained engineers in Amman handle installation, configuration and maintenance.
From single units to multi-site deployments, delivered and commissioned by our team.
Manufacturer warranty handled locally — no cross-border returns to manage.
| Output | 110–220 V AC, IEC C13 outlet |
|---|---|
| Compatible base units | sensorProbe and securityProbe base units |
| Relay | 1 × high-power SPST relay (5 V) |
|---|---|
| Load rating | IEC connector rated 10 A at 220 V AC and 10 A at 110 V AC |
| Input voltage | 110–220 V AC, IEC C14 inlet |
| Contact switching capacity | 16 A at 250 V AC (resistive load), 8 A at 250 V AC (inductive load) |
| Fuse | 10 A fuse, 380 V AC / 125 V DC |
| Contact material | AgCdO |
| Protocols | SNMP (command-line utilities included) |
|---|---|
| Notifications | SNMP traps, web interface, e-mail, SMS |
| Connection | RJ-45 jack to the base unit, UTP CAT5e/6 cable |
|---|---|
| Maximum cable length | Up to 30 m (100 ft) with standard CAT5/6 LAN cable |
| Power supply | Single 5 V DC supply from the base unit |
|---|---|
| Power consumption | Typical 471.00 mW, 94.20 mA |
| Dimensions | 115 × 80 × 40 mm |
|---|---|
| Status indicators | 4 LEDs: relay, power supply, AC line voltage, AC load voltage |
| Operating temperature | -40 °C to +70 °C |
| Storage temperature | -40 °C to +70 °C |
| Part number | PRB00-ACO |
|---|
| Brand | AKCP |
|---|---|
| Category | Data Centre & Environmental Monitoring |
| Product code | akcp-ac-sensor-controlled-relay |
| Type | Relay / controller |
| Connectivity | RJ-45 sensor port |
Full electrical, acoustic and interface specifications are published on the manufacturer's datasheet. Our team can confirm compatibility with your existing platform before you order.
The AKCP 8 Port Sensor Controlled Relay is a multi-port relay for process control that responds automatically to sensor status changes, without operator intervention during an alarm. Typical uses are on/off control of cooling equipment, power switching, activating alarms and energy management. Each…
The AKCP Isolated DC Voltage Sensor is a digital voltmeter that brings a custom DC signal into a sensorProbe+ or securityProbe base unit while keeping the normal alarm features: SNMP, e-mail and trap alerts on settable thresholds. The input is selectable between a 60 V range and a 5 V range, with…
The AKCP AC Voltage Sensor detects the presence or absence of AC line voltage in the 50–250 V AC range and reports a Normal or Alarm state in the base unit software and on an LED on the sensor. A typical use is to tell when a UPS has switched to battery power. It simply plugs into an AC power…
The AKCP IO-Digital8 Sensor adds 8 dry contacts to a securityProbe 5E or sensorProbe+ through a single RJ-45 sensor port, each reporting an Alarm or Normal status. Every contact can be set in software as an input or as an output of 0 V DC or 5 V DC, so one port can watch UPS status, security…
Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.
