Single- and three-phase AC power monitoring over Modbus for sensorProbe+ and securityProbe
The AKCP Power Monitoring Sensor lets you track mains power remotely instead of running manual power audits, with immediate alerts when something goes wrong. This four-wire sensor mounts on a 35 mm DIN rail and comes as a single phase (230 V AC), a three-phase (230/400 V AC) and a three-phase CT-type version. It measures phase line voltages, current, power factor, active energy and active power, with ±0.5% voltage and current accuracy, and meets IEC 62053-21 and IEC 62053-23. It connects over RS485 Modbus to the Modbus port of securityProbe and sensorProbe+ base units, where it gets its own Power Management menu, graphing and live PUE calculations. Installation should be done by licensed electricians. Vodatel supplies, installs and supports it in Jordan as an authorised AKCP partner.
Authorised AKCP partner in Jordan · Local warranty and support
More AKCP products in JordanFactory-trained engineers in Amman handle installation, configuration and maintenance.
From single units to multi-site deployments, delivered and commissioned by our team.
Manufacturer warranty handled locally — no cross-border returns to manage.
| Measures | Phase line voltages, current, power factor, active energy and active power |
|---|---|
| Measurement range | Voltage range: single phase 0.7–1.3 Un; three phase 161/279 – 300/520 V AC |
| Accuracy | Voltage ±0.5%, current ±0.5%, frequency ±0.2% |
| Compatible base units | securityProbe series, sensorProbe+ series |
| Rated voltage | Single phase 230 V AC; three phase 230/400 V AC |
| Basic current | 10 A (single and three phase); 1.5 A (three phase CT type) |
| Maximum current | 100 A (single and three phase); 6 A (three phase CT type) |
| Frequency | 50–60 Hz ±10% |
| Maximum sensors | Up to six three-phase and fourteen single-phase sensors on a single securityProbe or SPX+ |
|---|
| Modbus | RS485 Modbus |
|---|
| Connection | Connects to the Modbus port of the base unit |
|---|
| Power consumption | Internal: ≤2 W / 10 VA (per phase on three-phase models) |
|---|
| Dimensions | Single phase: 100 × 76 × 65.5 mm (H × W × D); three phase: 130 × 126 × 65 mm |
|---|---|
| Weight | Single phase: 0.35 kg; three phase: 0.7 kg (net) |
| Mounting | 35 mm DIN rail |
| Operating temperature | -10 °C to +50 °C |
| Operating humidity | ≤ 75% |
| Material | White plastic casing |
| Variants | Single phase meter; three phase meter; three phase meter, CT type |
|---|---|
| Certifications | IEC 62053-21 (active energy), IEC 62053-23 (reactive energy) |
| Supply options | Orderable for 110 or 220 power supplies (as stated by AKCP) |
| Brand | AKCP |
|---|---|
| Category | Data Centre & Environmental Monitoring |
| Product code | akcp-power-monitoring-sensor |
| Type | Power meter |
| Measures | AC voltage, Current, Power & energy |
| Connectivity | Modbus RS-485 |
Full electrical, acoustic and interface specifications are published on the manufacturer's datasheet. Our team can confirm compatibility with your existing platform before you order.
The AKCP Mini Sensor Controlled Relay is a small adapter that switches its output according to the status of a sensor connected to an AKCP base unit. It is used to drive the larger relay of an existing appliance, such as cooling or power equipment, from a low-current signal. The output is selectable…
The AKCP AC Sensor Controlled Relay switches mains power to a connected device in response to sensor alerts, for example turning on a fan when room temperature passes its threshold or a light when a motion detector triggers. It sits between a mains inlet and outlet, takes its control signal from a…
The AKCP 8 Port Sensor Controlled Relay is a multi-port relay for process control that responds automatically to sensor status changes, without operator intervention during an alarm. Typical uses are on/off control of cooling equipment, power switching, activating alarms and energy management. Each…
The AKCP Isolated DC Voltage Sensor is a digital voltmeter that brings a custom DC signal into a sensorProbe+ or securityProbe base unit while keeping the normal alarm features: SNMP, e-mail and trap alerts on settable thresholds. The input is selectable between a 60 V range and a 5 V range, with…
Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.
