Four-in-one sensor for air pollution level, temperature, humidity and static air pressure
The AKCP Air Pollution & Pressure Sensor (AQX4) combines four measurements in one compact unit: air pollution level, temperature, humidity and static air pressure. A gas sensor tracks pollutants such as CO2, NOx and VOCs and turns them into a 0–100% air pollution level, so you can watch whether air quality is stable or worsening. Static pressure is read from 300 to 1100 hPa, and subtracting two such sensors gives a differential pressure, which helps to check fan speeds, air supply and blocked filters. Temperature covers -40 °C to +85 °C and humidity 0 to 100% RH. It ships with a 4.6 m cable and can run up to 30 m. Vodatel supplies, installs and supports it in Jordan as an authorised AKCP partner.
Authorised AKCP partner in Jordan · Local warranty and support
More AKCP products in JordanFactory-trained engineers in Amman handle installation, configuration and maintenance.
From single units to multi-site deployments, delivered and commissioned by our team.
Manufacturer warranty handled locally — no cross-border returns to manage.
| Measures | Air pollution level, temperature, humidity and static air pressure |
|---|---|
| Measurement range | Static air pressure: 300–1100 hPa |
| Accuracy | Pressure: ±0.5 hPa absolute, ±0.05 hPa relative |
| Resolution | Temperature: 0.1 °C (0.2 °F) |
| Sensor type | Gas sensor (air pollution) |
| Output | Air pollution level (%) |
| Sensor count | 4 |
| Air pollution level range | 0–100% |
| Temperature range | -40 °C to +85 °C |
| Humidity range | 0–100% RH |
| Temperature accuracy | ±0.5 °C (at 25 °C) |
| Humidity accuracy | ±3% RH (typical) |
| Maximum cable length | 30 m (100 ft); ships with a fixed 4.6 m (15 ft) cable as standard, custom lengths available |
|---|
| Part number | AQX4 |
|---|
| Brand | AKCP |
|---|---|
| Category | Data Centre & Environmental Monitoring |
| Product code | akcp-air-pollution-pressure-sensor |
| Type | Sensor |
| Measures | Air quality, Temperature, Humidity, Differential pressure |
| Connectivity | RJ-45 sensor port |
Full electrical, acoustic and interface specifications are published on the manufacturer's datasheet. Our team can confirm compatibility with your existing platform before you order.
The AKCP In-Line Power Meter sits between the electrical source and a basic power strip or individual appliance, turning an ordinary strip into an intelligent PDU. It measures voltage, current, active power, energy, power factor and leakage current with billing-grade accuracy on 1 phase, 100–250 V…
The AKCP Power Monitoring Sensor lets you track mains power remotely instead of running manual power audits, with immediate alerts when something goes wrong. This four-wire sensor mounts on a 35 mm DIN rail and comes as a single phase (230 V AC), a three-phase (230/400 V AC) and a three-phase…
The AKCP Mini Sensor Controlled Relay is a small adapter that switches its output according to the status of a sensor connected to an AKCP base unit. It is used to drive the larger relay of an existing appliance, such as cooling or power equipment, from a low-current signal. The output is selectable…
The AKCP AC Sensor Controlled Relay switches mains power to a connected device in response to sensor alerts, for example turning on a fan when room temperature passes its threshold or a light when a motion detector triggers. It sits between a mains inlet and outlet, takes its control signal from a…
Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.
