J or K type thermocouple sensor reaching -200 °C to +900 °C for industrial and cryogenic monitoring
The AKCP Thermocouple Sensor brings industrial temperature monitoring into AKCP's monitoring platform. It is available with a J or K type thermocouple, and plugs directly into the AKCP J or K type thermocouple adapter, which also lets existing third-party thermocouples be monitored. A K type probe measures -200 °C to +900 °C and a J type probe -40 °C to +750 °C, making it suitable for heat treatment, process monitoring, cryogenics and medical applications. It works with securityProbe and sensorProbe+ base units, is powered by the base unit and can run up to 30 m (100 ft). Vodatel is an authorised AKCP partner and supplies, installs and supports it in Jordan.
Authorised AKCP partner in Jordan · Local warranty and support
More AKCP products in JordanFactory-trained engineers in Amman handle installation, configuration and maintenance.
From single units to multi-site deployments, delivered and commissioned by our team.
Manufacturer warranty handled locally — no cross-border returns to manage.
| Measures | Temperature (J or K type thermocouple) |
|---|---|
| Measurement range | K type: -200 °C to +900 °C (-330 °F to 1650 °F); J type: -40 °C to +750 °C (-40 °F to 1382 °F) |
| Accuracy | ±5 °C (±9 °F), sensorProbe+ and securityProbe series |
| Resolution | sensorProbe+ series: 0.1 °C (0.2 °F); securityProbe series: 0.5 °C (0.9 °F) |
| Sensor type | Thermocouple, J or K type |
| Sensor count | 1 |
| Compatible base units | securityProbe series, sensorProbe+ series |
| Connection | RJ-45; plugs directly into the AKCP J or K type thermocouple adapter |
|---|---|
| Maximum cable length | 30 m (100 ft) with approved low-capacitance shielded cable or UTP |
| Power supply | Powered by the base units; no additional power needed |
|---|---|
| Power consumption | Typical 7.80 mW, 1.56 mA |
| Dimensions | 0.61 m × 4.5 mm (sheath diameter) |
|---|
| Brand | AKCP |
|---|---|
| Category | Data Centre & Environmental Monitoring |
| Product code | akcp-thermocouple-sensor |
| Type | Sensor |
| Measures | Temperature |
| Connectivity | RJ-45 sensor port |
Full electrical, acoustic and interface specifications are published on the manufacturer's datasheet. Our team can confirm compatibility with your existing platform before you order.
The AKCP Spot Water Sensor detects water at a specific point and reports a wet or dry state to a compatible AKCP base unit. Its microprocessor-controlled capacitance technology lets it detect distilled water, which resistance-type sensors miss. The circuit is encased in epoxy so the sensor can stay…
The AKCP Rope Water Sensor monitors water leaks along a sensing cable, so one sensor can cover a large area such as a raised floor, a ceiling void, a basement or the perimeter of pumps, compressors and condensers. It reports wet or dry to a compatible base unit, and raises a critical state if the…
The AKCP Locate Rope Water Sensor detects water along a sensing rope and also reports where on the rope the first leak was detected, so staff can go straight to the problem under raised floors, in false ceilings or around pumps and condensers. The sensing rope is pre-ordered from 10 ft in multiples…
The AKCP Single Port Temperature and Humidity Sensor measures ambient temperature from -55 °C to +75 °C and relative humidity from 0 to 100% RH while using only one intelligent sensor port on the base unit, leaving an extra port free. It is powered by the base unit, detected automatically by…
Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.
