Skip to content

AKCP Rope Fuel Sensor

Rope-type fuel leak detector for tanks and generators, locates a leak within 1 m (1 ft)

The AKCP Rope Fuel Sensor (ropeFuel) is a rope-type leak detector that senses liquid hydrocarbon fuels at any point along its length and reports Wet or Dry to the base unit. It can pinpoint a leak to within 1 m (1 ft) and detects gasoline, diesel #1, Jet A/B/5/8, JP-4/5/7 and kerosene. Laid beneath fuel tanks, it suits generator sites and fuel transfer stations. The sensing rope can be ordered from 1 m up to 5 m, and the sensor connects to any sensorProbe+ or securityProbe sensor port with up to 30 m (100 ft) of CAT5/6 cable. It is normally single-use and must be replaced after exposure to fuel. Vodatel supplies and supports it in Jordan as an authorised AKCP partner.

  • Detects liquid hydrocarbon fuel anywhere along the rope
  • Locates a leak within 1 m (1 ft)
  • Detects gasoline, diesel #1, Jet A/B/5/8, JP-4/5/7, kerosene
  • Sensing rope from 1 m to 5 m, 20 ft leader cable
  • Status LED, up to 30 m (100 ft) of CAT5/6 cable
Manufacturer page

Authorised AKCP partner in Jordan · Local warranty and support

More AKCP products in Jordan

More features

  • Powered by the base unit, DIN rail or screw mounting

Why buy through Vodatel

Local technical support

Factory-trained engineers in Amman handle installation, configuration and maintenance.

Supply and rollout

From single units to multi-site deployments, delivered and commissioned by our team.

Warranty backed

Manufacturer warranty handled locally — no cross-border returns to manage.

More from Data Centre & Environmental Monitoring

Related products

  • AKCP probeSwitch
    AKCP

    AKCP probeSwitch

    The AKCP probeSwitch is a key-operated switch that lets a maintenance engineer turn off all notifications from an AKCP base unit with one turn of the key, then switch them back on when the work is done, so there is no need to log in to the web interface. It connects to a sensor port, is auto-sensed…

  • AKCP Modbus to SNMP Adapter
    AKCP

    AKCP Modbus to SNMP Adapter

    The AKCP Modbus to SNMP Adapter (MOD-A) makes it easier to wire Modbus appliances to the RS-485 Modbus and expansion port of a sensorProbeX+ or sensorProbe2+. It converts the RJ-45 MOD/EXP port into a 3-pin Phoenix terminal block (A+, B+, GND), so a 2-wire serial bus cable can be connected directly.…

  • AKCP Programmable Sensor LCD Display
    AKCP

    AKCP Programmable Sensor LCD Display

    The AKCP Programmable Sensor LCD Display plugs into a sensorProbe+ sensor port and shows the readings and Warning or Critical status of up to 8 AKCP intelligent or virtual sensors in a rotating list, configured through the web interface. It has a built-in temperature sensor measuring -40 °C to +75…

  • AKCP Sensor Adapter
    AKCP

    AKCP Sensor Adapter

    The AKCP Sensor Adapter (SEN-A) lets a base unit read third-party sensors that AKCP does not make. A selectable input, with autosense, accepts analogue sensors that output 0–10 V DC, or a dry contact input/output that keeps a 5 V DC supply on the connected device at all times. A 3-pin Phoenix…

Talk to us

Ready to specify AKCP Rope Fuel Sensor?

Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.