Ambient temperature from -55 °C to +75 °C, with optional NIST-calibrated dual or triple sensors
The AKCP SNMP Temperature Sensor measures ambient room temperature from -55 °C to +75 °C and shares the readings over the network through a compatible sensorProbe+ or securityProbe base unit, which can pass data to third-party monitoring platforms via SNMP. It reads in 0.1 °C steps with ±0.2 °C accuracy from -10 °C to +75 °C. NIST2 and NIST3 versions embed two or three sensors with a built-in calibration check and a NIST-traceable certificate. The sensor is powered by the base unit and the extendable TMP00 type can run up to 100 m (330 ft). Suitable for data centres, server rooms, BTS sites and control cabinets. Vodatel supplies and supports it in Jordan as an authorised AKCP partner.
Authorised AKCP partner in Jordan · Local warranty and support
More AKCP products in JordanFactory-trained engineers in Amman handle installation, configuration and maintenance.
From single units to multi-site deployments, delivered and commissioned by our team.
Manufacturer warranty handled locally — no cross-border returns to manage.
| Measures | Ambient room temperature |
|---|---|
| Measurement range | -55 °C to +75 °C (-67 °F to +167 °F) |
| Accuracy | ±0.2 °C from -10 °C to +75 °C (±0.5 °F from +14 °F to +167 °F), sensorProbe+ and securityProbe series |
| Resolution | 0.1 °C (0.2 °F) increments |
| Sensor type | Semiconductor, microprocessor controlled |
| Sensor count | NIST2 versions: 2; NIST3 versions: 3 |
| Compatible base units | NIST2: sensorProbe+ and securityProbe series; NIST3: sensorProbe+ only |
| Calibration | NIST-traceable calibration certificate (NIST2 / 3 versions), built-in calibration check |
| Connection | RJ-45 jack to sensor using UTP CAT5e/6 cable |
|---|---|
| Maximum cable length | 100 m (330 ft) with low-capacitance shielded cable or UTP (TMP00 extendable type) |
| Power supply | Powered by the base units; no additional power needed |
|---|---|
| Power consumption | Typical 7.25 mW, 1.45 mA |
| Dimensions | 56 × 55 × 33.3 mm |
|---|---|
| Mounting | DIN rail mounting, screw mounting |
| Variants | TMP01: fixed cable length, not designed for extension; TMP00: extendable cable |
|---|---|
| Part number | TMP00, TMP01, TMP00-NIST2, TMP01-NIST2, TMP00-NIST3, TMP01-NIST3 |
| Brand | AKCP |
|---|---|
| Category | Data Centre & Environmental Monitoring |
| Product code | akcp-snmp-temperature-sensor |
| Type | Sensor |
| Measures | Temperature |
| Connectivity | RJ-45 sensor port |
Full electrical, acoustic and interface specifications are published on the manufacturer's datasheet. Our team can confirm compatibility with your existing platform before you order.
The AKCP Thermocouple Sensor brings industrial temperature monitoring into AKCP's monitoring platform. It is available with a J or K type thermocouple, and plugs directly into the AKCP J or K type thermocouple adapter, which also lets existing third-party thermocouples be monitored. A K type probe…
The AKCP Spot Water Sensor detects water at a specific point and reports a wet or dry state to a compatible AKCP base unit. Its microprocessor-controlled capacitance technology lets it detect distilled water, which resistance-type sensors miss. The circuit is encased in epoxy so the sensor can stay…
The AKCP Rope Water Sensor monitors water leaks along a sensing cable, so one sensor can cover a large area such as a raised floor, a ceiling void, a basement or the perimeter of pumps, compressors and condensers. It reports wet or dry to a compatible base unit, and raises a critical state if the…
The AKCP Locate Rope Water Sensor detects water along a sensing rope and also reports where on the rope the first leak was detected, so staff can go straight to the problem under raised floors, in false ceilings or around pumps and condensers. The sensing rope is pre-ordered from 10 ft in multiples…
Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.
