Compact 1U securityProbe 5E base unit without video, 8 sensor ports, up to 500 sensors
securityProbe 5ES is the standard, no-video version of AKCP's securityProbe 5E base unit, suited to server rooms and remote sites that need environmental and intrusion monitoring in a compact 1U chassis weighing 1 kg. It offers 8 auto-sensing RJ-45 sensor ports and two expansion ports, and with E-Sensor8 and E-Opto16 modules a single unit can handle up to 500 sensors. It sends alerts by email, SMS/MMS and SNMP traps, supports SNMP v3 encryption and acts as a Modbus-to-SNMP gateway. Unlike the X20 and X60 models, it does not add dry contacts on board, and unlike 5ESV and 5ESVA it has no camera inputs. Vodatel supplies, installs and supports it in Jordan as an authorised AKCP partner.
Authorised AKCP partner in Jordan · Local warranty and support
More AKCP products in JordanFactory-trained engineers in Amman handle installation, configuration and maintenance.
From single units to multi-site deployments, delivered and commissioned by our team.
Manufacturer warranty handled locally — no cross-border returns to manage.
| Sensor ports | 8 × RJ-45 intelligent sensor ports (auto-sense) |
|---|---|
| Maximum sensors | Up to 500 sensors |
| Virtual sensors | Supported (power, Modbus, network devices and other SNMP equipment) |
| Expansion ports | 2 × RJ-45 expansion ports |
| Expansion modules | E-Sensor8 (8 sensor ports), E-Opto16 (16 dry contacts), Cabinet Control Unit (up to 25 per chain) |
| Inputs | 1 × USB 2.0 modem port |
| Outputs | Configurable 0/5 V DC outputs on any of the 8 RJ-45 sensor ports, internal speaker |
| Network | Ethernet 10/100 Mbps |
|---|---|
| Protocols | SNMP v1, SNMP v3 (encrypted), Modbus Master/Slave, Modbus RTU, Modbus over TCP/IP, HTTPS |
| Notifications | Email, SMS/MMS, SNMP traps |
| Cellular modem | Optional internal 3G/4G modem |
| Modbus | RS485 (2-pin terminal box) |
| Web interface | Built-in web UI for sensor configuration, data collection and graphing |
| Security | SNMP v3 encryption |
| Maximum cable length | Expansion modules extendable up to 300 m (1,000 ft) |
|---|
| Power supply | External 7.0–9 V DC, 3 A power adapter; optional DCW: external ±40–60 V DC input |
|---|---|
| Power consumption | Typical 5.025 W, 0.67 A |
| Dimensions | 8.5″ × 5.43″ × 1.80″ |
|---|---|
| Weight | 1 kg |
| Mounting | 1U rack mount, brackets included |
| Status indicators | LEDs for power and network connectivity |
| Operating temperature | -35 °C to +55 °C |
| Operating humidity | 20–80%, non-condensing |
| MTBF | 400,000 hours |
| Processor | AKCP i.MX25 |
| Memory | 128 MB NAND flash, on-board HC SD slot (up to 16 GB) |
| Variants | 5ES: no video; 5ESV: 4 × USB digital video inputs; 5ESVA: 4 × BNC analogue video inputs |
|---|
| Brand | AKCP |
|---|---|
| Category | Data Centre & Environmental Monitoring |
| Product code | akcp-securityprobe-5es |
| Type | Base unit |
| Connectivity | Ethernet, Cellular, Modbus RS-485 |
Full electrical, acoustic and interface specifications are published on the manufacturer's datasheet. Our team can confirm compatibility with your existing platform before you order.
securityProbe 5ES-X20 takes everything in the standard securityProbe 5ES, the no-video version of AKCP's 5E base unit, and adds 20 two-wire dry contact inputs in a 1U rack-mount box. It suits server rooms and remote sites where door contacts, alarm outputs and similar volt-free devices must be…
securityProbe 5ES-X60 combines the standard, no-video securityProbe 5ES with 60 additional two-wire dry contact inputs in a 2U rack-mount box, making it AKCP's highest-capacity dry-contact option in this line. It fits server rooms, plant rooms and remote sites with many door, alarm and…
The securityProbe 5ESV is the video version of AKCP's securityProbe 5E base unit. It combines environmental monitoring, access control and security alerts in one Linux-based device with a built-in web interface, and adds four USB inputs for AKCP High Definition Digital cameras, with PTZ control over…
The securityProbe 5ESV-X20 is the securityProbe 5ESV with a built-in bank of 20 two-wire dry contact inputs, so door switches, alarm outputs and other volt-free signals can be wired straight to the unit. The inputs accept up to 5 V DC, or up to 40 V DC when an internal jumper selects opto-isolated…
Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.
