securityProbe base unit with 4 USB HD camera inputs, 8 sensor ports and up to 500 sensors
The securityProbe 5ESV is the video version of AKCP's securityProbe 5E base unit. It combines environmental monitoring, access control and security alerts in one Linux-based device with a built-in web interface, and adds four USB inputs for AKCP High Definition Digital cameras, with PTZ control over the Pelco D bus. Eight RJ-45 AutoSense ports take AKCP intelligent sensors, and expansion modules extend the system to as many as 500 sensors. It reports through email, SMS, SNMP traps and Modbus, so it suits server rooms, telecom cabinets and remote sites. Compared with the 5ESV-X20 and 5ESV-X60 it has no extra bank of dry contact inputs. Vodatel supplies, installs and supports it in Jordan as an authorised AKCP partner.
Authorised AKCP partner in Jordan · Local warranty and support
More AKCP products in JordanFactory-trained engineers in Amman handle installation, configuration and maintenance.
From single units to multi-site deployments, delivered and commissioned by our team.
Manufacturer warranty handled locally — no cross-border returns to manage.
| Sensor ports | 8 × RJ-45 AutoSense sensor ports |
|---|---|
| Maximum sensors | Up to 500 sensors |
| Expansion ports | 2 × RJ-45 expansion ports, 115.2 kbps data rate |
| Expansion modules | E-Sensor8 (8 intelligent sensor ports), E-opto16 (16 dry contact ports), Cabinet Control Unit (up to 25 per chain) |
| Inputs | 1 × USB 2.0 modem port, analogue audio in (2.5″ jack), internal microphone, RS485 (Modbus) |
| Outputs | Configurable 0/5 V DC outputs on any of the 8 sensor ports, internal speaker out |
| Video inputs | 4 × USB inputs for AKCP HD digital cameras (320×240 or 640×480) |
| Expansion distance | Up to 300 m (1,000 ft), expansion modules daisy chainable |
| PTZ camera control | 4 × PTDC controller ports (Pelco D) |
| Network | Ethernet 10/100 Mbps |
|---|---|
| Protocols | SNMP v1 and encrypted v3, Modbus Master / Slave, Modbus RTU, Modbus over TCP / IP |
| Notifications | Email, SMS / MMS, SNMP traps |
| Cellular modem | Optional internal 3G/4G modem |
| Modbus | Modbus Master / Slave, Modbus RTU and Modbus over TCP / IP (Modbus to SNMP gateway) |
| Web interface | Built-in web UI for sensor configuration, data collection and graphing |
| Security | HTTPS (SSL) |
| Power supply | External 7.0–9 V DC, 3 A adapter; optional DCW external ±40–60 V DC input |
|---|---|
| Power consumption | Typical 6.150 W, 0.82 A |
| Dimensions | 18″ × 5″ × 3.45″ |
|---|---|
| Weight | 3.1 kg |
| Mounting | 2U rack mount, brackets included |
| Status indicators | LEDs for power, network connectivity, dry contact online and status |
| Operating temperature | -35 °C to +55 °C |
| Operating humidity | 20–80%, non-condensing |
| MTBF | 400,000 hours |
| Processor | AKCP i.MX25 |
| Memory | 128 MB NAND flash, SD (HC) slot up to 16 GB |
| Part number | SEC5ESV |
|---|---|
| Variants | 5ES (no video), 5ESV (4 × USB digital video inputs), 5ESVA (4 × BNC analogue video inputs) |
| Brand | AKCP |
|---|---|
| Category | Data Centre & Environmental Monitoring |
| Product code | akcp-securityprobe-5esv |
| Type | Base unit |
| Connectivity | RJ-45 sensor port, Ethernet, Cellular, Modbus RS-485 |
Full electrical, acoustic and interface specifications are published on the manufacturer's datasheet. Our team can confirm compatibility with your existing platform before you order.
The securityProbe 5ESV-X20 is the securityProbe 5ESV with a built-in bank of 20 two-wire dry contact inputs, so door switches, alarm outputs and other volt-free signals can be wired straight to the unit. The inputs accept up to 5 V DC, or up to 40 V DC when an internal jumper selects opto-isolated…
The securityProbe 5ESV-X60 is the highest-capacity contact version of the securityProbe 5ESV, with 60 dry contact inputs on the unit itself. Where the 5ESV-X20 offers 20 inputs, the X60 suits larger cabinets, plant rooms and telecom sites with many door, alarm and status contacts; the inputs can be…
The powerProbeX+ is AKCP's branch-circuit power monitoring base unit, part of the sensorProbe+ family. One unit measures up to 48 individual circuits through eight banks of six CT inputs, with three voltage transformer inputs for single-phase or three-phase supplies from 100 V to 450 V AC. It…
The Wireless Tunnel Server (SP-WTS) is the LoRa gateway for AKCP's battery-powered Wireless Tunnel sensor nodes. It builds a private wireless network that needs no cloud service or third-party software, and collects, stores and graphs data from up to 30 wireless devices carrying 4 sensors each.…
Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.
