Platinum RTD sensor measuring from -200 °C to +150 °C for ultra-cold storage
The AKCP Ultra Cold Temperature Sensor is a PT100 platinum RTD probe for monitoring very low temperatures, from -200 °C to +150 °C, in applications such as ultra-cold storage of vaccines and medical products. It reports in 0.1 °C increments with a typical accuracy of ±0.15 °C. The sensor plugs into an RJ-45 intelligent sensor port of a sensorProbe+ base unit and takes its power from the unit, so no extra supply is needed. It can be extended up to 18 m (60 ft) using standard CAT5/6 LAN cable. It is compatible with the sensorProbe+ platform only. Vodatel, an authorised AKCP partner, supplies and supports it across Jordan.
Authorised AKCP partner in Jordan · Local warranty and support
More AKCP products in JordanFactory-trained engineers in Amman handle installation, configuration and maintenance.
From single units to multi-site deployments, delivered and commissioned by our team.
Manufacturer warranty handled locally — no cross-border returns to manage.
| Measures | Temperature (ultra-cold) |
|---|---|
| Measurement range | -200 °C to +150 °C (-328 °F to +302 °F) |
| Accuracy | Typical ±0.15 °C (±0.3 °F) |
| Resolution | 0.1 °C (0.2 °F) increments |
| Sensor type | PT100 platinum RTD |
| Sensor count | 1 |
| Compatible base units | sensorProbe+ platform only |
| Connection | RJ-45 to the base unit, UTP CAT5e/6 cable |
|---|---|
| Maximum cable length | Up to 18 m (60 ft) with standard CAT5/6 LAN cable |
| Power supply | Powered by the sensorProbe+ family units; no additional power needed |
|---|
| Dimensions | 75 × 55 × 27 mm |
|---|---|
| Operating temperature | -35 °C to +80 °C |
| Operating humidity | 20–80% RH, non-condensing |
| Brand | AKCP |
|---|---|
| Category | Data Centre & Environmental Monitoring |
| Product code | akcp-ultra-cold-temperature-sensor |
| Type | Sensor |
| Measures | Temperature |
| Connectivity | RJ-45 sensor port |
Full electrical, acoustic and interface specifications are published on the manufacturer's datasheet. Our team can confirm compatibility with your existing platform before you order.
The AKCP SNMP Temperature Sensor measures ambient room temperature from -55 °C to +75 °C and shares the readings over the network through a compatible sensorProbe+ or securityProbe base unit, which can pass data to third-party monitoring platforms via SNMP. It reads in 0.1 °C steps with ±0.2 °C…
The AKCP Thermocouple Sensor brings industrial temperature monitoring into AKCP's monitoring platform. It is available with a J or K type thermocouple, and plugs directly into the AKCP J or K type thermocouple adapter, which also lets existing third-party thermocouples be monitored. A K type probe…
The AKCP Spot Water Sensor detects water at a specific point and reports a wet or dry state to a compatible AKCP base unit. Its microprocessor-controlled capacitance technology lets it detect distilled water, which resistance-type sensors miss. The circuit is encased in epoxy so the sensor can stay…
The AKCP Rope Water Sensor monitors water leaks along a sensing cable, so one sensor can cover a large area such as a raised floor, a ceiling void, a basement or the perimeter of pumps, compressors and condensers. It reports wet or dry to a compatible base unit, and raises a critical state if the…
Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.
