Skip to content
العربية

Wall Mount

Professional mounting solutions

12 products · 3 brands · Supplied and supported in Jordan

Showing 12 of 12 products

  • Chief LTM1U
    Chief

    Chief LTM1U

    The Chief LTM1U is the large tilt wall mount in the Fusion series. It supports landscape displays from about 37 to 63 inches and tilts from +2 to -12 degrees, which helps reduce glare and aim the screen at viewers in boardrooms, lobbies and meeting rooms. Centris low-profile tilt balances the screen on its centre of gravity so it moves without tools, while ControlZone adjustment fine-tunes height and level after the display is on the wall. Centerless lateral shift allows up to 441 mm of side movement, and ClickConnect latching secures the screen with an audible click. The depth from the wall is around 51 mm.

  • Chief Tempo Flat Panel Wall Mount System
    Chief

    Chief Tempo Flat Panel Wall Mount System

    The Chief Tempo AS3LD is a configurable wall mount system for large-format flat panels, launched by Chief in 2023. Besides holding the display, it includes two Lever Lock storage plates that can carry small devices such as media players or controllers behind the screen, and the mount pulls away from the wall for service access. Post-installation adjustments cover up to 25 mm of levelling and 10 degrees of tilt in 2.5 degree steps. Its low installed depth is intended to help meet ADA depth limits with 49 to 86 inch displays. It suits meeting rooms, classrooms and public spaces where equipment should stay hidden and serviceable. A variant with a power strip is sold as AS3LDP7.

  • Chief XFA1U
    Chief

    Chief XFA1U

    The Chief XFA1U is an extra-large floor stand in the Fusion series for single displays from 55 to 100 inches or larger, carrying up to 300 lb (136 kg). A turn knob lets one person raise or lower the screen by hand or with a power drill across a 42 to 59.6 inch height range, and the head tilts plus or minus 5 degrees. Flexible cable covers conceal cabling along the column, a magnetic removable front cover gives access to AV equipment stored inside, and tool-free latching flags accept a padlock for added security. It suits boardrooms, training rooms and showrooms where wall mounting is not possible. It is available in black or silver.

  • Chief LSM1U
    Chief

    Chief LSM1U

    The Chief LSM1U is the large fixed wall mount in the Fusion series, designed for landscape displays from about 37 to 63 inches. It keeps the screen close to the wall, with a depth of around 50 mm, and lets installers fine-tune the position after the display is hung. ControlZone height and roll adjustment corrects level for the whole configuration, Centerless lateral shift gives up to 441 mm of side-to-side movement, and ClickConnect latching secures the screen with an audible click. It suits meeting rooms, reception areas, classrooms and digital signage installs where a clean, low-profile result and fast installation matter. It accepts mounting patterns up to 880 x 400 mm.

  • Chief RMT2
    Chief

    Chief RMT2

    The Chief RMT2 is the Medium FIT tilt wall mount from Chief, designed for displays from 32 to 65 inches and carrying up to 125 lb (56.7 kg). It accepts mounting patterns from 100 x 100 mm up to 506 x 400 mm and tilts from 0 to -12 degrees to help reduce glare and aim the screen at viewers. It is part of Chief's FIT series of display mounts.

  • Peerless SF650
    Peerless

    Peerless SF650

    The Peerless-AV SmartMount SF650 is a universal flat wall mount for 39" to 75" displays weighing up to 79 kg (175 lb). Its low-profile design holds the display only 30 mm from the wall, and it fits displays with mounting patterns up to 742 x 405 mm, covering VESA patterns from 200 x 100 up to 600 x 400 mm. The Hook-and-Hang system lets a single person hang the display, with up to 6 mm of vertical adjustment per adaptor bracket for levelling and a horizontal shift of up to 203 mm for centring on the wall. The SF650 security model ships with theft-resistant screws and a security tool, while the SF650P uses standard hardware fitted with a Philips screwdriver. The design is UL listed and tested to four times its stated load. Vodatel supplies, installs and supports it in Jordan as an authorised Peerless-AV partner.

  • Peerless-AV SmartMount DS-VW765-LAND Full-Service Video Wall Mount (Landscape)
    Peerless

    Peerless-AV SmartMount DS-VW765-LAND Full-Service Video Wall Mount (Landscape)

    The Peerless-AV DS-VW765-LAND is a full-service, landscape-orientation mount for building LCD video walls from 40" to 65" displays. Each mount carries up to 56.70 kg and accepts VESA patterns from 200 x 200 mm up to 700 x 400 mm, with adaptor plates for other patterns. Displays sit flush against the wall, and a pull-out, prop-open mechanism gives quick service access. Tool-less micro-adjustment at 8 points aligns neighbouring displays, integrated tie-backs keep display-to-display cabling tidy, and included security hardware stops the mount extending from the wall. The steel mount sits 78–97 mm deep, is UL listed and TAA compliant. Vodatel supplies, installs and supports it in Jordan as an authorised Peerless-AV partner.

  • Peerless-AV PRG-UNV Precision Gear Projector Mount
    Peerless

    Peerless-AV PRG-UNV Precision Gear Projector Mount

    The Peerless-AV PRG-UNV is a universal ceiling projector mount that uses a precision-gear design to set projector tilt and roll with two adjustment knobs, turned by Phillips screwdriver or by hand. It carries multimedia projectors up to 22 kg (50 lb) and offers ±20° tilt, ±10° roll and 360° swivel when fitted to an extension column (±15° when flush mounted). The Spider universal adaptor plate extends up to 448 mm to fit most projector models, a quick-release mechanism simplifies servicing, and cables route through the mount out of sight. Pre-installed security screws can lock tilt and roll to prevent tampering. It is RoHS, TAA and UL certified and carries a limited 5-year warranty. Vodatel supplies, installs and supports it in Jordan as an authorised Peerless-AV partner.

  • Peerless-AV SmartMount SA761PU Articulating Wall Mount
    Peerless

    Peerless-AV SmartMount SA761PU Articulating Wall Mount

    The Peerless-AV SmartMount SA761PU is a full-motion articulating wall mount for large displays from 43" to 75" and beyond, carrying up to 68 kg (150 lb) on wood, concrete, cinder or breeze block. The arm extends the display up to 774 mm from the wall and retracts to 76 mm, shifts ±203 mm sideways to centre the screen regardless of stud position, and pivots ±90°. Tilt adjusts 15° forward and 5° backward, with ±5° levelling after installation and a ratcheting handle to lock the angle. An I-shaped adaptor plate supports VESA patterns from 200 x 100 to 600 x 400 mm and keeps rear connections accessible. Hook-and-Hang installation and integrated cable management keep fitting tidy. Vodatel supplies, installs and supports it in Jordan as an authorised Peerless-AV partner.

  • Peerless-AV SmartMount SR560M Flat Panel Cart
    Peerless

    Peerless-AV SmartMount SR560M Flat Panel Cart

    The Peerless-AV SmartMount SR560M is a mobile flat panel cart for single displays from 32" to 75", carrying up to 68.2 kg (150 lb). Its universal display adaptor takes VESA patterns from 200 x 200 to 600 x 400 mm in landscape or portrait, and the display can be positioned anywhere along the column, up to 60" at centre, with 5 degrees of plumb adjustment to keep heavy screens level. Four 4" (102 mm) swivel casters, two of them locking, make it easy to move a display from room to room, and four plastic base pads are included for when casters are not needed. A three-piece base gives rigidity and quick assembly, integrated cable management conceals cabling, and the textured black powder coat helps hide fingerprints and dust. Vodatel supplies, installs and supports it in Jordan as an authorised Peerless-AV partner.

  • Peerless-AV SmartMount ST660P Universal Tilt Wall Mount
    Peerless

    Peerless-AV SmartMount ST660P Universal Tilt Wall Mount

    The Peerless-AV SmartMount ST660P is a universal tilting wall mount for 39" to 80" flat panel displays weighing up to 91 kg (200 lb). Tilt adjusts 15° forward and 5° backward, and a ratcheting handle locks the angle, with IncreLok tilt locking to deter tampering. It accepts VESA patterns from 200 x 100 up to 800 x 400 mm and displays with patterns up to 824 x 405 mm. Post-installation levelling gives up to 6 mm of vertical adjustment per adaptor bracket, and the display can be shifted up to 203 mm horizontally to centre it on the wall. The Hook-and-Hang system lets one person install the display. The ST660P ships with standard hardware, while the ST660 adds theft-resistant screws. Vodatel supplies, installs and supports it in Jordan as an authorised Peerless-AV partner.

  • Vogels PFW 6850
    Vogels

    Vogel's PFW 6850

    The Vogel's PFW 6850 is an ultra-slim turn-and-tilt wall mount for displays up to 30 kg (66 lbs), with a swing-out arm that can be placed to swing out from the left or right.

Questions

Wall Mount in Jordan — common questions

Where can I buy display wall mounts in Jordan?

From Vodatel Jordan in Amman. We are an authorised partner for Chief and Peerless-AV and supply display wall mounts across Jordan, the Levant and the Gulf. Call +962 6 4626667 or email info@vodatel.com.jo for availability and a quotation.

Which wall mount fits my screen?

The mount must match the display's VESA pattern and carry its weight, and the wall must be able to hold it. Fixed mounts keep the screen flat to the wall; tilting and articulating mounts help when viewing angles vary.

Do you install and support display wall mounts?

Yes. Our engineers in Amman install, configure and support everything we supply, and we handle manufacturer warranty claims locally.

Do you deliver outside Jordan?

Yes. Alongside customers across Jordan, we supply Iraq, Palestine, Syria and Lebanon, and the Gulf: Saudi Arabia, the UAE, Qatar, Kuwait, Bahrain and Oman.