Brings 4–20 mA industrial transmitters into a sensorProbe through one RJ-45 sensor port
The AKCP 4-20mA Converter lets a sensorProbe base unit read third-party transmitters that output a 4–20 mA current loop, a signal widely used in process control because it resists electrical noise over long distances. Typical sources include CO2 sensors, pH meters, air particle sensors and precision airflow sensors. Once connected, the readings gain graphing, web and email alerts, thresholds and limits, and the sensor scale is programmed in the base unit's interface. Accuracy is ±0.15% of full scale. The converter is powered by the base unit and can be placed up to 15 m away. Vodatel supplies, installs and supports it in Jordan as an authorised AKCP partner.
Authorised AKCP partner in Jordan · Local warranty and support
More AKCP products in JordanFactory-trained engineers in Amman handle installation, configuration and maintenance.
From single units to multi-site deployments, delivered and commissioned by our team.
Manufacturer warranty handled locally — no cross-border returns to manage.
| Measures | 4–20 mA current-loop signals from third-party transmitters |
|---|---|
| Measurement range | 4–20 mA current loop input |
| Accuracy | ±0.15% full scale (±0.3% full scale, maximum) |
| Output | +0.4 V to +2.0 V |
| Sensor count | 1 |
| Compatible base units | sensorProbe family; up to 2 per sensorProbe2, 8 per sensorProbe8 |
| Linearity | ±0.09% full scale, maximum |
| Inputs | 2-pin Phoenix connector for the 4–20 mA current loop (Iin+ and Iin-) |
|---|
| Connection | RJ-45 to the base unit, UTP CAT5e/6 cable |
|---|---|
| Maximum cable length | 15 m (50 ft) using standard CAT5/6 LAN cable |
| Power supply | 5 V DC, powered by the sensorProbe base unit |
|---|---|
| Power consumption | Typical 120 mW, 24 mA |
| Dimensions | 65 (W) × 62 (H) × 15 (D) mm |
|---|---|
| Mounting | DIN rail, keyhole, screw, pipe clamp and cable ties |
| Status indicators | 2 LEDs: current loop (current detection) and power supply |
| Operating temperature | -35 °C to 80 °C |
| Operating humidity | 20–80% RH, non-condensing |
| Brand | AKCP |
|---|---|
| Category | Data Centre & Environmental Monitoring |
| Product code | akcp-4-20ma-converter |
| Type | Adapter / converter |
| Measures | Current |
| Connectivity | RJ-45 sensor port |
Full electrical, acoustic and interface specifications are published on the manufacturer's datasheet. Our team can confirm compatibility with your existing platform before you order.
The AKCP Vibration Sensor is a normally closed contact switch that signals an alarm when vibration strikes the surface it protects, or when a window is broken. It guards walls, ceilings, windows, safes and cabinets against forced entry or tampering, and a built-in tamper switch on a separate circuit…
The AKCP Smoke Detector is a photoelectric detector that turns smoke detection into a network-monitored alarm. It reports Smoke or No Smoke to a sensorProbe+ or securityProbe base unit through an RJ-45 sensor port, and can also connect to a fire alarm panel at the same time. A disconnect alarm…
The AKCP Siren and Strobe Light adds a loud audible alarm and a bright flashing light to sensorProbe+ and securityProbe base units, using a single intelligent sensor port and no extra power supply. The siren reaches 100 dB at 100 cm and the strobe uses eight super bright LEDs flashing 400 times per…
The AKCP Sensor Status Light is a three-colour indicator that changes colour according to the status of a sensor on a sensorProbe+ base unit. Green, orange and red lights can each be solid, blinking at different speeds or off, and an internal buzzer can add an audible alert. Mounted on top of a…
Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.
