Skip to content

Starlink Router 3

Starlink's top Wi-Fi 6 router: tri band 4x4 MU-MIMO, up to 235 devices, mesh with up to 3 nodes.

Router 3 is Starlink's top Wi-Fi router, with Wi-Fi 6 and three separate radio bands (tri band 4x4 MU-MIMO) to serve many connected devices, up to 235. It is included in Standard 4 X and is also sold separately as a main router or as a mesh node, with up to 3 Starlink mesh nodes. It has two LAN ports and one WAN port, measures 43.4 x 298.6 x 120.4 mm, weighs 0.57 kg and is configured for indoor use. The box holds a 60 W power supply and cable, an Ethernet cable and two port plugs. It cannot replace a Gen 2 router as the main router.

  • Wi-Fi 6, tri band 4x4 MU-MIMO
  • Up to 235 devices, WPA2 security
  • Two LAN ports and one WAN port
  • Mesh with up to 3 Starlink nodes
  • 43.4 x 298.6 x 120.4 mm, 0.57 kg
Starlink Router 3 datasheet (PDF)

Authorised Starlink partner in Jordan · Local warranty and support

More Starlink products in Jordan

More features

  • 60 W power supply and Ethernet cable included

Why buy through Vodatel

Local technical support

Factory-trained engineers in Amman handle installation, configuration and maintenance.

Supply and rollout

From single units to multi-site deployments, delivered and commissioned by our team.

Warranty backed

Manufacturer warranty handled locally — no cross-border returns to manage.

More from Satellite Internet

Related products

  • Starlink Router 3 (Performance, No PSU)
    Starlink

    Starlink Router 3 (Performance, No PSU)

    This Router 3 bundle is made for the Performance (Gen 3) kit. It is a tri band Wi-Fi 6 router with two latching Ethernet LAN ports and a removable cover, measuring 55 x 300 x 120 mm. It has no router power supply: it is powered from the Advanced Power Supply over the included 5 m Starlink cable…

  • Starlink Pivot Mount (Standard 4 / 4 X, Enterprise)
    Starlink

    Starlink Pivot Mount (Standard 4 / 4 X, Enterprise)

    The Standard Pivot Mount is made for slanted, shingled roofs. Its swivelling mechanism lets the installer fine-tune the angle and direction of the dish. It works with Standard 4, Standard 4 X and Enterprise kits. The box includes the mount, two sealant tape squares, two sealant tape strips, two lag…

  • Starlink V5
    Starlink

    Starlink V5

    Starlink V5 is a lightweight home kit with a smaller form factor and greater power efficiency than Standard 4 X. The dish measures 384 x 306 x 34 mm and weighs 1.1 kg (3.8 kg for the full kit), is rated IP67 Type 4 and uses an average of 35-50 W. It comes with a Router Mini (Wi-Fi 6, up to 235…

  • Starlink Wall Mount (Standard 4 / 4 X)
    Starlink

    Starlink Wall Mount (Standard 4 / 4 X)

    The Starlink Wall Mount is installed on an exterior wall near the top of the gable or fascia, giving the dish a platform that reaches out from the wall. It accommodates an overhang of up to 4 in and works with Standard 4, Standard 4 X and Enterprise kits. The box includes the wall mount, silicone,…

  • Starlink Pipe Adapter (Standard 4 / 4 X)
    Starlink

    Starlink Pipe Adapter (Standard 4 / 4 X)

    The Pipe Adapter attaches the Standard dish to an existing metal pole with a diameter of 31-63.5 mm (1.25-2.5 in). The pipe is not included, and the adapter is not for PVC or plastic pipes. It works with Standard 4, Standard 4 X and Enterprise kits. The box contains the Pipe Adapter Mount, an Allen…

  • Starlink Ridgeline Mount (Standard 4 / 4 X)
    Starlink

    Starlink Ridgeline Mount (Standard 4 / 4 X)

    The Ridgeline Mount needs no drilling. It sits on the top ridge of a gable roof and is held in place by ballast weights, and it is rated for winds up to 80 kph (50 mph). It suits metal and shingled roofs with a slope under 45 degrees and is not recommended for clay tile. It works with Standard 4,…

  • Starlink Mobility Mount (Standard 4 / 4 X)
    Starlink

    Starlink Mobility Mount (Standard 4 / 4 X)

    The Mobility Mount is a permanent mount that seals against water ingress on wood, fibreglass, metal, plastic and slotted vehicle rack rails. Its stainless steel fasteners are corrosion resistant, and its 8° mounting angle helps keep a signal in wet weather. It works with Standard 4 and Standard 4 X.…

  • Starlink Roof Rack Mount (Standard 4 / 4 X)
    Starlink

    Starlink Roof Rack Mount (Standard 4 / 4 X)

    The Roof Rack Mount is a removable mount that attaches the Standard dish to vehicle roof racks with a thickness of 15-44.5 mm and a width of up to 95 mm, or to racks with compatible T-slots. It works with Standard 4 and Standard 4 X. The box contains the mount base, a grip pad, four M8 flanged head…

Talk to us

Ready to specify Starlink Router 3?

Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.