Skip to content

Starlink Ridgeline Mount (Standard 4 / 4 X)

No-drill mount for the ridge of a gable roof, held by ballast weights and rated for winds up to 80 kph.

The Ridgeline Mount needs no drilling. It sits on the top ridge of a gable roof and is held in place by ballast weights, and it is rated for winds up to 80 kph (50 mph). It suits metal and shingled roofs with a slope under 45 degrees and is not recommended for clay tile. It works with Standard 4, Standard 4 X and Enterprise kits. The box includes the mount, four ballast weights and 20 cable routing clips. The mount weighs 5.8 kg and the ballast 25.3 kg.

  • No drilling; sits on the gable roof ridge
  • Held by 4 ballast weights
  • Rated for winds up to 80 kph
  • Metal and shingled roofs under 45°; not for clay tile
  • Fits Standard 4, Standard 4 X, Enterprise
Starlink Ridgeline Mount (Standard 4 / 4 X) datasheet (PDF)

Authorised Starlink partner in Jordan · Local warranty and support

More Starlink products in Jordan

Why buy through Vodatel

Local technical support

Factory-trained engineers in Amman handle installation, configuration and maintenance.

Supply and rollout

From single units to multi-site deployments, delivered and commissioned by our team.

Warranty backed

Manufacturer warranty handled locally — no cross-border returns to manage.

More from Satellite Internet

Related products

  • Starlink Mobility Mount (Standard 4 / 4 X)
    Starlink

    Starlink Mobility Mount (Standard 4 / 4 X)

    The Mobility Mount is a permanent mount that seals against water ingress on wood, fibreglass, metal, plastic and slotted vehicle rack rails. Its stainless steel fasteners are corrosion resistant, and its 8° mounting angle helps keep a signal in wet weather. It works with Standard 4 and Standard 4 X.…

  • Starlink Roof Rack Mount (Standard 4 / 4 X)
    Starlink

    Starlink Roof Rack Mount (Standard 4 / 4 X)

    The Roof Rack Mount is a removable mount that attaches the Standard dish to vehicle roof racks with a thickness of 15-44.5 mm and a width of up to 95 mm, or to racks with compatible T-slots. It works with Standard 4 and Standard 4 X. The box contains the mount base, a grip pad, four M8 flanged head…

  • Starlink X-Frame Base (Standard 4 / 4 X, Enterprise)
    Starlink

    Starlink X-Frame Base (Standard 4 / 4 X, Enterprise)

    The X-Frame Base is for ground-level installation or quick setup of the Standard dish, where no roof or wall mounting is needed. It is supplied with a mast and a mast adapter. It works with Standard 4, Standard 4 X and Enterprise kits. The box contains the X-Frame Base, the Mast Adapter and the…

  • Starlink Standard 4 / 4 X to Actuated Mount Adapter
    Starlink

    Starlink Standard 4 / 4 X to Actuated Mount Adapter

    This adapter lets a Standard 4 or Standard 4 X dish use an existing Standard Actuated mount (Short Wall, Long Wall, Pivot, Ground Pole or Ridgeline), for customers upgrading from the older kit. The wall mount itself is not included. Starlink recommends a Standard mount for new installations. The box…

  • Starlink Power Supply Mount (Standard 4 X)
    Starlink

    Starlink Power Supply Mount (Standard 4 X)

    The Power Supply Mount fixes the Standard 4 X power supply to a wall or other surface. The power supply snaps in, and cable retention stops the input cable from being pulled out. It is compatible with the Standard 4 X Power Supply and the Standard 4 X DC-DC Power Supply. The box contains the mount,…

  • Starlink Router 3 Mount
    Starlink

    Starlink Router 3 Mount

    The Router 3 Mount fixes the Router 3 directly to a wall or other surface. It suits offices without desk space and mobility installations where space is tight. The router snaps in and cable retention keeps the cables in place. The box contains the router mount, two screws and two drywall anchors.…

  • Starlink Cable 15 m
    Starlink

    Starlink Cable 15 m

    This is a replacement or spare 15 m (49.2 ft) Starlink cable. It is compatible with the Starlink V5, Standard 4 and Standard 4 X kits and connects the dish to the rest of the system. The box contains a single Starlink Cable 15 m. Package size is 135 x 50 x 360 mm and package weight is 1 kg. It is a…

  • Starlink Cable 45 m
    Starlink

    Starlink Cable 45 m

    The Starlink Cable 45 m is a longer cable that replaces the 15 m cable supplied in the kit when more distance is needed between the dish and the router. It is designed for Starlink Standard 4 and Standard 4 X kits, and the Jordan shop also lists it for Starlink V5. The cable length is 45 m (147.6…

Talk to us

Ready to specify Starlink Ridgeline Mount (Standard 4 / 4 X)?

Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.