Skip to content

Starlink Mini Ethernet Cable 15 m

Sealed 15 m Ethernet cable linking the Starlink Mini or Performance kit to a Router 3 or third-party router.

The Starlink Mini Ethernet Cable 15 m is a sealed cable that connects the Starlink Mini or Starlink Performance kit, through its RJ45 port, to a Router 3 or a third-party router or device. The seal keeps the port protected from water, which is needed to keep the Mini's IP67 rating when its Ethernet port is used. The cable length is 15 m (49.2 ft). Package dimensions are 135 x 50 x 360 mm and the package weighs 1 kg.

  • Cable length 15 m (49.2 ft)
  • Connects Mini or Performance to a router
  • Works with Router 3 or third-party routers
  • Waterproof seal for the Ethernet port
  • Package 135 x 50 x 360 mm, 1 kg
Starlink Mini Ethernet Cable 15 m datasheet (PDF)

Authorised Starlink partner in Jordan · Local warranty and support

More Starlink products in Jordan

Why buy through Vodatel

Local technical support

Factory-trained engineers in Amman handle installation, configuration and maintenance.

Supply and rollout

From single units to multi-site deployments, delivered and commissioned by our team.

Warranty backed

Manufacturer warranty handled locally — no cross-border returns to manage.

More from Satellite Internet

Related products

  • Starlink Mini USB-C Cable 5 m
    Starlink

    Starlink Mini USB-C Cable 5 m

    The Starlink Mini USB-C Cable is a 5 m power cable that runs the Starlink Mini over USB-C. It replaces the standard 15 m power cable when a shorter run is enough. It needs a 100 W (20 V/5 A) USB-C power source and is not designed for charging phones. It is compatible with the Starlink Mini kit. The…

  • Starlink Cable Routing Kit
    Starlink

    Starlink Cable Routing Kit

    The Cable Routing Kit is for routing the Starlink cable through most interior and exterior walls. It includes a 3/4 in (1.9 cm) spade bit, a drill bit, a cable routing tool, silicone sealant, grommets and wall clips. It is meant for drilling through most walls, but not masonry, concrete or hard-coat…

  • Starlink Masonry Routing Kit
    Starlink

    Starlink Masonry Routing Kit

    The Masonry Routing Kit is for routing the Starlink cable through masonry, concrete or hard-coat stucco walls, excluding EIFS. It includes a 3/4 in (1.9 cm) spade bit, drill bits, a cable routing tool, silicone sealant, grommets and wall clips. Tools needed are a hammer, hammer drill, Phillips head…

  • Starlink Performance (Gen 3) Cable 5 m
    Starlink

    Starlink Performance (Gen 3) Cable 5 m

    The Starlink Performance (Gen 3) Cable 5 m is a shorter dish cable that replaces the 25 m Performance cable when the power supply is close to the install location. It is compatible with the Performance (Gen 3) kit. The box contains one 5 m (16.4 ft) cable. The package measures 99 x 216 x 76 mm and…

  • Starlink Performance (Gen 3) Cable 25 m
    Starlink

    Starlink Performance (Gen 3) Cable 25 m

    The Starlink Performance (Gen 3) Cable 25 m is a replacement or spare dish cable for the Performance (Gen 3) kit. It is 25 m (82 ft) long and compatible with the Performance (Gen 3) kit. The box contains one 25 m cable. The package measures 221 x 406 x 66 mm and weighs 1.7 kg.

  • Starlink Performance (Gen 3) Cable 50 m
    Starlink

    Starlink Performance (Gen 3) Cable 50 m

    The Starlink Performance (Gen 3) Cable 50 m is a longer dish cable for the Performance (Gen 3) kit, for installs where more distance is needed between the dish location and the power supply. It is 50 m (164 ft) long and compatible with the Performance (Gen 3) kit. The box contains one 50 m cable.…

  • Starlink Pivot Mount (Standard Actuated / Performance Gen 1)
    Starlink

    Starlink Pivot Mount (Standard Actuated / Performance Gen 1)

    The Pivot Mount is a roof mount for the older Standard Actuated and Performance (Gen 1) dishes. It is intended for shingled roofs and requires drilling; it is not for tile, slate or clay roofing. It is for those earlier kits only. The mount measures 22 x 11 x 15.6 cm. The package measures 24.7 x 14…

  • Starlink Short Wall Mount (Standard Actuated / Performance Gen 1)
    Starlink

    Starlink Short Wall Mount (Standard Actuated / Performance Gen 1)

    The Short Wall Mount is for the older Standard Actuated and Performance (Gen 1) dishes. It mounts on an exterior wall near the top of the gable and requires drilling. It is for those earlier kits only. The mount measures 7 cm long, 5.1 cm wide and 15.3 cm high. The package measures 21 x 14 x 8.7 cm…

Talk to us

Ready to specify Starlink Mini Ethernet Cable 15 m?

Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.