Skip to content

Starlink Masonry Routing Kit

Cable routing kit for drilling through masonry, concrete or hard-coat stucco walls (not EIFS).

The Masonry Routing Kit is for routing the Starlink cable through masonry, concrete or hard-coat stucco walls, excluding EIFS. It includes a 3/4 in (1.9 cm) spade bit, drill bits, a cable routing tool, silicone sealant, grommets and wall clips. Tools needed are a hammer, hammer drill, Phillips head drill bit, stud or electrical finder, goggles, gloves and a mask. Starlink recommends it for people with prior cable-routing experience. The package measures 35.2 x 16.5 x 4.4 cm and weighs 1 kg.

  • For masonry, concrete or hard-coat stucco (not EIFS)
  • Spade bit, drill bits and cable routing tool
  • Sealant, grommets and wall clips included
  • Needs hammer drill, goggles, gloves and mask
  • Package 35.2 x 16.5 x 4.4 cm, 1 kg

Authorised Starlink partner in Jordan · Local warranty and support

More Starlink products in Jordan

Why buy through Vodatel

Local technical support

Factory-trained engineers in Amman handle installation, configuration and maintenance.

Supply and rollout

From single units to multi-site deployments, delivered and commissioned by our team.

Warranty backed

Manufacturer warranty handled locally — no cross-border returns to manage.

More from Satellite Internet

Related products

  • Starlink Performance (Gen 3) Cable 5 m
    Starlink

    Starlink Performance (Gen 3) Cable 5 m

    The Starlink Performance (Gen 3) Cable 5 m is a shorter dish cable that replaces the 25 m Performance cable when the power supply is close to the install location. It is compatible with the Performance (Gen 3) kit. The box contains one 5 m (16.4 ft) cable. The package measures 99 x 216 x 76 mm and…

  • Starlink Performance (Gen 3) Cable 25 m
    Starlink

    Starlink Performance (Gen 3) Cable 25 m

    The Starlink Performance (Gen 3) Cable 25 m is a replacement or spare dish cable for the Performance (Gen 3) kit. It is 25 m (82 ft) long and compatible with the Performance (Gen 3) kit. The box contains one 25 m cable. The package measures 221 x 406 x 66 mm and weighs 1.7 kg.

  • Starlink Performance (Gen 3) Cable 50 m
    Starlink

    Starlink Performance (Gen 3) Cable 50 m

    The Starlink Performance (Gen 3) Cable 50 m is a longer dish cable for the Performance (Gen 3) kit, for installs where more distance is needed between the dish location and the power supply. It is 50 m (164 ft) long and compatible with the Performance (Gen 3) kit. The box contains one 50 m cable.…

  • Starlink Pivot Mount (Standard Actuated / Performance Gen 1)
    Starlink

    Starlink Pivot Mount (Standard Actuated / Performance Gen 1)

    The Pivot Mount is a roof mount for the older Standard Actuated and Performance (Gen 1) dishes. It is intended for shingled roofs and requires drilling; it is not for tile, slate or clay roofing. It is for those earlier kits only. The mount measures 22 x 11 x 15.6 cm. The package measures 24.7 x 14…

  • Starlink Short Wall Mount (Standard Actuated / Performance Gen 1)
    Starlink

    Starlink Short Wall Mount (Standard Actuated / Performance Gen 1)

    The Short Wall Mount is for the older Standard Actuated and Performance (Gen 1) dishes. It mounts on an exterior wall near the top of the gable and requires drilling. It is for those earlier kits only. The mount measures 7 cm long, 5.1 cm wide and 15.3 cm high. The package measures 21 x 14 x 8.7 cm…

  • Starlink Pipe Adapter (Performance Gen 2)
    Starlink

    Starlink Pipe Adapter (Performance Gen 2)

    The Pipe Adapter is a pole adapter for the older Performance (Gen 2) dish, formerly called Flat High Performance. It fits any pole up to 62 mm in diameter and requires the Wedge Mount Kit supplied with the Flat High Performance kit. It is for that earlier kit only. The package measures 26.4 x 16.5 x…

  • Starlink Standard 4
    Starlink

    Starlink Standard 4

    The Starlink Standard 4 kit is the everyday satellite internet package for offices, shops, sites and branches that need a link where fibre is slow to arrive or unavailable. It combines a flat electronically steered dish, a 15 m cable and a small indoor Router Mini that covers up to about 204 square…

  • Starlink Standard 4 X
    Starlink

    Starlink Standard 4 X

    Starlink Standard 4 X pairs the same flat Standard dish as the Standard 4 with the larger Router 3, a tri-band Wi-Fi 6 router with 4x4 MU-MIMO. It suits larger offices, clinics, schools and multi-room sites that want stronger coverage, up to about 297 square metres, and the option to extend with…

Talk to us

Ready to specify Starlink Masonry Routing Kit?

Send us your requirement and our engineers will confirm compatibility, quantities and lead time — usually the same working day.